Extender.linksys.com Manual Configuration

 

To assist the users in setting up their Linksys extender manually without facing issues, we have given simple instructions below:

• First, we advise the users to switch on their system. They can carry on the process on a PC or laptop.
• After that, they must check for a robust internet connection's availability.
• Next, you have to connect your system using an Ethernet cord.
• Therefore, you have to plug the Ethernet cord's one end into your laptop or PC’s internet port.
• Then, plug the other end of the same Ethernet cord into the extender’s data port.
• Make sure that the Ethernet cable you are using must be working fine.
• After that, plug your Linksys WiFi range extender into an electrical outlet to turn it on.
• Then, run a reliable and secure internet browser on your system to avoid network privacy issues.
• Further, you should enter the link 'http://extender.linksys.com.'
• Type this link in the navigation address bar and tap the enter key after that.
• As a result, the official Linksys Login page will come up on the screen.
• On the official Linksys login page, you must type the correct login credentials.
• Further, type the network name of your existing router in the specific field when the Extender.linksys.com setup screen loads.
• Later, you have to go with the manual option.
• After that, switch your extender off for about 2 minutes.
• Now, you have to switch on the Linksys WiFi range extender.

This way, you are done with Extender.linksys.com manual configuration.